Many wooden barrels have permanent tops that must be cut.
Empty 55-gallon barrels can be reused for a variety of purposes including making rain barrels, planters and simply for storage. Since some 55-gallon barrels have a non-removable top, you must cut it off before you can reuse it. Whether the barrel is made from wood, plastic or metal, the cutting process requires only basic power tools and the proper cutting blade depending on the barrel material. Does this Spark an idea?
Instructions
1. Set the barrel upright, or on its side, depending on which position you find easier to work with. Draw a line all the way around the top of the barrel using a black marker in the location where you want to cut it.
2. Turn the barrel onto its side on an unpaved area of ground. Ask another person to hold the end of it steady so that it does not roll as you cut through it. You can also place a wooden block on either side of the barrel to prevent it from rolling.
3. Install a wood cutting blade into a circular saw if the barrel is made of wood or plastic. If the barrel is made of metal install a carbide cutting blade, which is much stronger.
4. Put on safety glasses and a dust mask.
5. Press the trigger on the circular saw and lower the blade toward the marker line on top of the barrel. Push lightly down on the blade until it cuts through the barrel. Move the blade towards you and cut down the side of the marker line that is closest to you until you reach the ground.
6. Remove the saw blade from the barrel and walk around to the other uncut side. Roll the barrel until you can access the uncut area on the bottom as well as the uncut side. Repeat the process to cut the marker line with the saw until the barrel separates in two pieces and the top comes off.
Tags: barrel made, cutting blade, marker line, 55-gallon barrels, barrels have, uncut side