Collect rain in a rain barrel for to use to water your lawn or garden. The barrel collects the rain that enters the gutters on your roof. Use an old wine barrel to set up the system. A spigot at the bottom of the barrel allows you to hook up a hose to use the water were you need it. Collecting the rain water helps save money on water bills and saves water. Does this Spark an idea?
Instructions
1. Cut a hole in the top large enough to fit the gutter downspout. If the top of the barrel is open, cover it with a piece of screen and cut a hole in the screen to hold the downspout. Use the drill to insert screws to hold it in place. Insert the downspout and seal with the plumber's tape.
2. Cut a hole in the bottom of one of the sides large enough to fit the spigot. Place one end of the spigot into the hole. The spout should be on the outside, pointing down. Apply plumber's tape to the part of the spigot that touches the barrel. Squeeze the sealant out over the tape. Smooth it out with your finger. The sealant needs to dry before it comes in contact with water.
3. Hook up a hose to the spigot when you want to use the water.
Tags: large enough, plumber tape