Rain chan cups attach to the gutters of your house
Rain chains are another way for the water in your gutters to flow down to the ground. Cups are used with the rain chain in which the water flows down to create a type of water feature. Installing the rain chain cups involves attaching the chain for the cups to the gutters of your house. You can to this task by first obtaining the rain chain cups that you want to use. Does this Spark an idea?
Instructions
1. Open the package for your rain cups and spread them out on the ground.
2. Find and remove the ball nuts at the bottom of each rain cup section, depending on the length that you need. Turn the ball nuts to the left or counterclockwise to remove them.
3. Take the connector off of the bottom of the rain cup section. Attach the connector to the top of the next section of rain cups.
4. Secure the connector back in place and tighten the ball nuts. Repeat steps 2 through 4 to connect additional sections of ran cups together.
5. Set up the ladder next to the downspout for the gutter. Go up the ladder and disconnect the downspout from the gutter. Set the section of downspout aside.
6. Locate the hole in the gutter that was used for the downspout. Place the gutter hook in the hole and then insert the S-hook though the loop.
7. Lift the rain chain up off the ground and connect the loop at the top to the S-hook. Observe the water flowing down the rain cups after the next rain.
Tags: rain chain, ball nuts, chain cups, rain cups, gutters your, gutters your house, rain chain cups